0
TECHNICAL PAPERS

Local Variations of Strain and Strain Rate in Roll Bite Region During Rolling of Steels

[+] Author and Article Information
Ampere A. Tseng, Shi R. Wang

Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287-6106

A. C. W. Lau

Department of Mechanical Engineering and Mechanics, Drexel University, Philadelphia, PA 19104

J. Eng. Mater. Technol 120(1), 86-96 (Jan 01, 1998) (11 pages) doi:10.1115/1.2806843 History: Received September 25, 1994; Revised June 09, 1997; Online November 27, 2007

Abstract

A combined experimental-numerical approach has been developed to quantify the strain rate variation of the workpiece in the roll bite region. In this approach, cold rolling experiments at a production mill were conducted first. Then tensile and microhardness tests were performed on workpieces before and after cold rolling to establish the relationship between the microhardness and plastic strain of the material. Microhardness measurements were also conducted in the roll bite region on a partially cold rolled workpiece. A finite element rolling simulation was performed to predict the spatial variations of the strain and strain rate. Through microhardness matching, it was found that the finite-element predicted strains agree very well with those actually existing in the rolled workpiece. Consequently, the finite-element predicted strain rates, whose time-accumulation directly gave strains which matched the actual strains, were verified. Finally, a finite-element simulation of both cold and hot rolling was conducted to assess the effect of several major rolling parameters on the strain rate variation in the bite region. Results show that the spatial variations of strain rate in the roll bite region are extremely nonuniform for both cold and hot rolling.

Copyright © 1998 by The American Society of Mechanical Engineers
Your Session has timed out. Please sign back in to continue.

References

Figures

Tables

Errata

Discussions

Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In