On the Limit of Surface Integrity of Alumina by Ductile-Mode Grinding

[+] Author and Article Information
I. Zarudi, L. C. Zhang

Department of Mechanical and Mechatronic Engineering, The University of Sydney, NSW 2006, Australia

J. Eng. Mater. Technol 122(1), 129-134 (Apr 27, 1999) (6 pages) doi:10.1115/1.482776 History: Received October 04, 1997; Revised April 27, 1999
Copyright © 2000 by ASME
Your Session has timed out. Please sign back in to continue.


Zarudi, I., and Zhang, L. C., 1997, “Subsurface Structure Change of Silicon After Ultra-Precision Grinding,” Advances in Abrasive Technology, L. C. Zhang and N. Yasunaga, eds., Vol. 33, World Scientific, Singapore, pp. 33–38.
Suzuki, H., Wajima, N., Zahmaty, M. S., Kuriyagava, T., and Syoji, K., 1997, “Precision Grinding of a Spherical Surface Accuracy Improving by On-Machine Measurement,” Advances in Abrasive Technology, L. C. Zhang and N. Yasunaga, eds., World Scientific, Singapore, pp. 116–121.
Zarudi, I., and Zhang, L. C., 1997, “Surface and Subsurface Structure of Alumina After Ductile Mode Grinding,” Proc. of 12-th ASPE Annual Meeting, pp. 267–270.
Komanduri,  R., 1996, “On Material Removal Mechanisms in Finishing of Advanced Ceramics and Glasses,” CIRP Ann., 45, pp. 9–514.
Bifano,  T. G., Dow,  T. A., and Scattergood,  R. O., 1991, “Ductile-Regime Grinding: A New Technology for Machining Brittle Materials,” ASME J. Eng. Mater. Technol., 113, pp. 184–189.
Tele,  R., 1995, “Ceramography of High Performance Ceramics. Part IX: Pores and Chips,” Prakt. Metallorg., 32, pp. 440–466.
Glasbey, C. A., 1995, Image Analysis for the Biological Science, Chichester, New York.
Zarudi,  I., Zhang,  L. C., and Mai,  Y.-W., 1996, “Subsurface Damage in Alumina Induced by Single-Point Scratching,” J. Mater. Sci., 31, pp. 905–914.
Hirsh, P. B., 1971, Electron Microscopy of Thin Crystals, Butterworth, London.
Chin, G. Y., 1975, “Slip and Twinning Systems in Ceramic Crystals,” Deformation of Ceramic Materials, R. C. Brand and R. E. Tressler, eds., pp. 25–44.
Hagan,  T., 1979, “Micromechanics of Crack Nucleating During Indentation,” J. Mater. Sci., 14, pp. 2975–2980.
Zhang,  Bi, and Howes,  T. D., 1995, “Subsurface Evaluation of Ground Ceramics,” CIRP Ann., 44, pp. 263–266.
Galiev,  S. U., 1996, “Experimental Observations and Discussion of Counterintuitive Behavior of Plates and Shallow Shells Subjected to Blast Loading,” Int. J. Impact Eng., 18, pp. 783–802.
Timoshenko, S. P., and Woinowsky-Krieger, S., 1976, Theory of Plates and Shells, McGraw-Hill, Singapore.
Rooke, D. P., and Cartwrite, D. J., 1976, Compendium of Stress-Intensity Factors, Her Majesty’s Stationery Office, London.
Xu,  H. H. K., Wei,  L., and Jahanmir,  S., 1996, “Influence of Grain Size on the Grinding Response of Alumina,” J. Am. Ceram. Soc., 79, pp. 1307–1313.


Grahic Jump Location
Preparation of cross-section view samples for TEM investigations: (a) cutting into thin slices; (b) gluing two slices together
Grahic Jump Location
Topography of surfaces after ductile-regime grinding: (a) and (b) the 1 μm-grained alumina; (c) and (d) the 25 μm-grained alumina; (a) and (c) 3-d image of the surface; (b) and (d) general view
Grahic Jump Location
Effect of table speed on Rms roughness of alumina with different grain sizes
Grahic Jump Location
Effect of table speed on surface area covered by pits
Grahic Jump Location
Topography of pits: (a) the 1 μm-grained alumina, (b) the 25 μm-grained alumina
Grahic Jump Location
Subsurface structure in the vicinity of a pit: (a) general view; (b) a detailed view of the pore edge with microcracks
Grahic Jump Location
Subsurface structure of alumina after ultra-precision grinding: (a) the 1 μm-grained alumina, (b) the 25 μm-grained alumina
Grahic Jump Location
Ductile-mode grinding of alumina containing pores
Grahic Jump Location
Model for interaction between an abrasive grain and material containing pores: (a) and (b) closed pores, (c) an open pore; (a) the 1 μm-grained alumina, (b) the 25 μm-grained alumina




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In