Determination of Precise Indentation Flow Properties of Metallic Materials Through Analyzing Contact Characteristics Beneath Indenter

[+] Author and Article Information
Sung-Hoon Kim, Min-Kyung Baik

Dongil Kwon

School of Materials Science and Engineering, Seoul National University, Seoul, 151-742, Korea

J. Eng. Mater. Technol 127(3), 265-272 (Jun 03, 2005) (8 pages) doi:10.1115/1.1865183 History: Received February 11, 2004; Revised October 23, 2004; Online June 03, 2005
Copyright © 2005 by ASME
Your Session has timed out. Please sign back in to continue.


Ahn,  J.-H., and Kwon,  D., 2001, “Derivation of plastic stress-strain relationship from ball indentation: Examination of strain definition and pileup effect,” J. Mater. Res., 16, pp. 3170–3178.
Haggag, F. M., 1993, “In-situ measurements of mechanical properties using novel automated ball indentation system,” ASTM STP 1204, Philadelphia, pp. 27–44.
Suresh,  S., and Giannakopoulos,  A. E., 1998, “A new method for estimating residual stresses by instrumented sharp indentation,” Acta Mater., 46(16), pp. 5755–5767.
Lee,  Y.-H., and Kwon,  D., 2002, “Residual stresses in DLC/Si and Au/Si systems: application of a stress-relaxation model to the nanoindentation technique,” J. Mater. Res., 17(4), pp. 901–906.
Malzbender,  J., and de With,  G., 2000, “Energy dissipation, fracture toughness and the indentation load-displacement curve of coated materials,” Surf. Technol., 135, pp. 60–68.
Murty,  K. L., Mathew,  M. D., Wang,  Y., Shah,  V. N., and Haggag,  F. M., 1998, “Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel,” Int. J. Pressure Vessels Piping, 75(11), pp. 831–840.
Asif,  S. A. S., Wahl,  K. J., and Colton,  R. J., 1999, “Nanoindentation and contact stiffness measurement using force modulation with a capacitive load-displacement transducer,” Rev. Sci. Instrum., 70(3), pp. 2408–2413.
Lucas, B. N., Oliver, W. C., and Swindeman, J. E., 1998, “The dynamics of frequency-specific, depth-sensing indentation testing,” in Fundamentals of Nanoindentation and Nanotribology, N. R. Moody et al., eds., MRS, Warrendale, PA, Vol. 522, pp. 3–14.
Oliver,  W. C., and Pharr,  G. M., 1992, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7(6), pp. 1564–1583.
Doerner,  M. F., and Nix,  W. D., 1986, “A method for interpreting the data from depth-sensing indentation instruments,” J. Mater. Res., 1(4), pp. 601–616.
Tabor, D., 1951, Hardness of Metals, Clarendon Press, Oxford, p. 2.
Jeon,  E.-c., Park,  J.-S., and Kwon,  D., 2003, “Statistical Analysis of Experimental Parameters in Continuous Indentation Tests Using Taguchi Method,” ASME J. Eng. Mater. Technol., 125, pp. 406–411.
Francis, H. A., 1976, “Phenomenological Analysis of Plastic Spherical Indentations,” Trans. ASME, July, pp. 272–281.
Taljat,  B., and Pharr,  G. M., 1998, “Pile-up behavior of spherical indentations in engineering materials,” Mater. Res. Soc. Symp. Proc., 522, pp. 33–38.
Rhee, S. S., and McClintock, F. A., 1962, “On the effect of strain hardening on strain concentrations,” Proc. 4th US Nat. Conf. Applied Mechanics, ASME, Berkeley, CA.
Norbury,  A. L., and Samuel,  T., 1928, “The recovery and sinking-in or piling-up of material in the brinell test, and the effects of these factors on the correlation of the brinell with certain other hardness tests,” J. Iron Steel Inst., London, 117, pp. 673–687.
Matthews,  J. R., 1980, “Indentation hardness and hot pressing,” Acta Metall., 28, pp. 311–318.
Hill,  R., Storkers,  B., and Zdunek,  A. B., 1989, “A theoretical study of the Brinell hardness test,” Proc. R. Soc. London, Ser. A, 23, pp. 301–330.
Cheng,  Y. T., and Cheng,  C. M., 1998, “Effect of sinking in and piling up on estimating the contact area under load in indentation,” Philos. Mag. Lett., 78, pp. 115–120.


Grahic Jump Location
Indentation load-depth curves: (a) single and (b) multiple indentation curve
Grahic Jump Location
Deformation phenomena around the indenter; (a) pile-up and (b) sink-in
Grahic Jump Location
Contact morphology and definitions of depth values
Grahic Jump Location
The finite element mesh
Grahic Jump Location
Indentation load-depth curves from continuous indentation tests and from FE simulation: (a) Al2011 and (b) SCM4
Grahic Jump Location
Correlation between the pile-up parameter s/h and the work-hardening exponent n
Grahic Jump Location
Influence of penetration depth on pile-up parameter for five materials
Grahic Jump Location
Correlation between pile-up parameter s/h and yield ratio E/Y
Grahic Jump Location
Comparison of flow curves from continuous indentation tests and those from tensile tests for nine materials
Grahic Jump Location
Comparison of flow properties from continuous indentation tests and those from tensile tests



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In