Research Papers

Investigating the Relationships Between Structures and Properties of Al Alloys Incorporated With Ti and Mg Inclusions

[+] Author and Article Information
Halil Ibrahim Kurt

Technical Sciences,
Gaziantep University,
Gaziantep 27310, Turkey
e-mail: hiakurt@gmail.com

Ibrahim H. Guzelbey

Department of Mechanical Engineering,
Gaziantep University,
Gaziantep 27310, Turkey

Serdar Salman

Department of Metallurgical and
Materials Engineering,
Marmara University,
İstanbul 34722, Turkey

Razamzan Asmatulu

Department of Mechanical Engineering,
Wichita State University,
Wichita, KS 67260

Mustafa Dere

Technical Sciences,
Gaziantep University,
Gaziantep 27310, Turkey

Contributed by the Materials Division of ASME for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received July 23, 2015; final manuscript received January 11, 2016; published online May 10, 2016. Assoc. Editor: Curt Bronkhorst.

J. Eng. Mater. Technol 138(3), 031006 (May 10, 2016) (6 pages) Paper No: MATS-15-1169; doi: 10.1115/1.4032849 History: Received July 23, 2015; Revised January 07, 2016

This study investigates the influence of titanium (Ti) and magnesium (Mg) additions on aluminum (Al) alloys in order to evaluate the relationship between the structure and properties of the new alloys. The alloys obtained at elevated temperatures mainly consist of Al–2Mg–1Ti, Al–2Mg–3Ti, Al–4Mg–2Ti, and Al–6Mg–2Ti alloys, as well as α and τ solid solution phases of intermetallic structures. Microstructural analyses were performed using X-ray diffraction (XRD), optical microscope, and energy dispersive spectrometry (EDS) techniques. Test results show that the average grain size of the alloys decreased with the addition of Ti inclusions during the casting and solidification processes, and the smallest grain size was found to be 90 μm for the Al–6Mg–3Ti alloy. In addition, tensile properties of the Al–Mg–Ti alloys were initially improved and then worsened after the addition of higher concentrations of Ti. The highest tensile and hardness values of the alloys were Al–4Mg–2Ti (205 MPa) and Al–6Mg–3Ti (80 BHN). The primary reasons for having higher mechanical properties may be attributed to strengthening of the solid solution and refinement of the grain size and shape during the solidification process. For this study, the optimum concentrations of Ti and Mg added to the Al alloys were 4 and 2 wt.%, respectively. This study may be useful for field researchers to develop new classes of Al alloys for various industrial applications.

Copyright © 2016 by ASME
Your Session has timed out. Please sign back in to continue.


Song, M. , Wu, Z. , and He, Y. , 2008, “ Effects of Yb on the Mechanical Properties and Microstructures of an Al–Mg Alloy,” Mater. Sci. Eng.: A, 497(1–2), pp. 519–523. [CrossRef]
Wang, Z. , and Tian, R. , 1989, Handbook of Aluminum Alloy and Processing, Central South University of Technology Publishing, Changsha, China.
Kaufman, J. G. , Rooy, E. L. , and Society, A. F. , 2004, “ Aluminum Alloy Castings: Properties, Processes, and Applications,” ASM International, Materials Park, OH.
Mirchandani, P. , Benn, R. , Heck, K. , Lee, E. , Chia, E. , and Kim, N. , 1989, Light-Weight Alloys for Aerospace Applications, TMS, Warrendale, PA, p. 33.
Frazier, W. E. , and Cook, J. , 1989, “ An X-Ray Diffraction Study of RST Al-Ti-V Alloys,” Scr. Metall., 23(1), pp. 39–43. [CrossRef]
Shih, M. H. , Yu, C. Y. , Kao, P. W. , and Chang, C. P. , 2001, “ Microstructure and Flow Stress of Copper Deformed to Large Plastic Strains,” Scr. Mater., 45(7), pp. 793–799. [CrossRef]
Hamana, D. , Nebti, S. , and Hamamda, S. , 1990, “ Effect of the Zirconium Addition on the Microstructure of Al + 8 wt.% Mg Alloy,” Scr. Metall. Mater., 24(11), pp. 2059–2064. [CrossRef]
Ding, X. P. , Cui, H. , Zhang, J. X. , Li, H. X. , Guo, M. X. , Lin, Z. , Zhuang, L. Z. , and Zhang, J. S. , 2015, “ The Effect of Zn on the Age Hardening Response in an Al–Mg–Si Alloy,” Mater. Des., 65, pp. 1229–1235. [CrossRef]
El-Rehim, A. F. A. , Sakr, M. S. , El-Sayed, M. M. , and El-Hafez, M. A. , 2014, “ Effect of Cu Addition on the Microstructure and Mechanical Properties of Al–30wt% Zn Alloy,” J. Alloys Compd., 607(0), pp. 157–162. [CrossRef]
Zhang, W.-w. , Lin, B. , Cheng, P. , Zhang, D.-t. , and Li, Y.-y. , 2013, “ Effects of Mn Content on Microstructures and Mechanical Properties of Al-5.0Cu-0.5Fe Alloys Prepared by Squeeze Casting,” Trans. Nonferrous Met. Soc. China, 23(6), pp. 1525–1531. [CrossRef]
Pourkia, N. , Emamy, M. , Farhangi, H. , and Ebrahimi, S. H. S. , 2010, “ The Effect of Ti and Zr Elements and Cooling Rate on the Microstructure and Tensile Properties of a New Developed Super High-Strength Aluminum Alloy,” Mater. Sci. Eng.: A, 527(20), pp. 5318–5325. [CrossRef]
Alipour, M. , Aghdam, B. G. , Rahnoma, H. E. , and Emamy, M. , 2013, “ Investigation of the Effect of Al–5Ti–1B Grain Refiner on Dry Sliding Wear Behavior of an Al–Zn–Mg–Cu Alloy Formed by Strain-Induced Melt Activation Process,” Mater. Des., 46, pp. 766–775. [CrossRef]
ASTM, 2013, “ Standard Test Methods for Determining Average Grain Size,” ASTM International, West Conshohocken, PA, Standard No. E-112.
ASTME, 2012, “ Standard Test Methods for Rockwell Hardness of Metallic Materials,” ASTM International, West Conshohocken, PA, Standard No. E18-11.
ASTM, 2014, “ Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric),” ASTM International, West Conshohocken, PA, Standard No. B557M-14.
Hayes, F. H. , Watson, A. , and Dobatkina, T. , 2005, “ Al-Mg-Ti (Aluminium—Magnesium—Titanium),” Light Metal Systems. Part 3, G. Effenberg , and S. Ilyenko , eds., Springer, Berlin, pp. 1–4.
Butt, M. Z. , and Feltham, P. , 1993, “ Solid-Solution Hardening,” J. Mater. Sci., 28(10), pp. 2557–2576. [CrossRef]
Cisse, J. , Kerr, H. , and Bolling, G. , 1974, “ The Nucleation and Solidification of Al-Ti Alloys,” Metall. Trans., 5(3), pp. 633–641. [CrossRef]
Eisenreich, H. , and Pütter, H. , 1954, “ Magnesium-Titanium Ternary Systems,” Metall. internationale Fachzeitschrift, 8, pp. 624–625.
Schumacher, P. , and Greer, A. L. , 1994, “ Enhanced Heterogeneous Nucleation of α-Al in Amorphous Aluminium Alloys,” Mater. Sci. Eng.: A, 181–182, pp. 1335–1339. [CrossRef]
Ding, W. , Xia, T. , and Zhao, W. , 2014, “ Performance Comparison of Al–Ti Master Alloys With Different Microstructures in Grain Refinement of Commercial Purity Aluminum,” Materials, 7(5), pp. 3663–3676. [CrossRef]
Fang, D. R. , Duan, Q. Q. , Zhao, N. Q. , Li, J. J. , Wu, S. D. , and Zhang, Z. F. , 2007, “ Tensile Properties and Fracture Mechanism of Al–Mg Alloy Subjected to Equal Channel Angular Pressing,” Mater. Sci. Eng.: A, 459(1–2), pp. 137–144. [CrossRef]
Kumar, G. S. V. , Murty, B. S. , and Chakraborty, M. , 2005, “ Development of Al–Ti–C Grain Refiners and Study of Their Grain Refining Efficiency on Al and Al–7Si Alloy,” J. Alloys Compd., 396(1–2), pp. 143–150. [CrossRef]
Zhang, Q. , Xiao, B. L. , and Ma, Z. Y. , 2013, “ In Situ Formation of Various Intermetallic Particles in Al–Ti–X(Cu, Mg) Systems During Friction Stir Processing,” Intermetallics, 40, pp. 36–44. [CrossRef]
Ahmad, Z. , 2001, “ Mechanical Behavior and Fabrication Characteristics of Aluminum Metal Matrix Composite Alloys,” J. Reinf. Plast. Compos., 20(11), pp. 921–944. [CrossRef]
Kerimov, K. M. , and Dunaev, S. F. , 1989, “ The M2Mg3Al18 Phase in Al-Mg-Transition Metal Systems,” J. Less-Common Met., 153(2), pp. 267–273. [CrossRef]
Murty, B. , Kori, S. , and Chakraborty, M. , 2002, “ Grain Refinement of Aluminium and Its Alloys by Heterogeneous Nucleation and Alloying,” Int. Mater. Rev., 47(1), pp. 3–29. [CrossRef]
Easton, M. , and St John, D. , 1999, “ Grain Refinement of Aluminum Alloys: Part I. The Nucleant and Solute Paradigms—A Review of the Literature,” Metall. Mater. Trans. A, 30(6), pp. 1613–1623. [CrossRef]
Sun, Y. , 2006, “ Phase-Field Simulation of Microporosity Formation in Solidification,” Ph.D. thesis, University of Iowa, Iowa City, IA.
Ebrahimi, S. H. S. , and Emamy, M. , 2010, “ Effects of Al–5Ti–1B and Al–5Zr Master Alloys on the Structure, Hardness and Tensile Properties of a Highly Alloyed Aluminum Alloy,” Mater. Des., 31(1), pp. 200–209. [CrossRef]
American Society for Metals, 1973, “ Metals Handbook Volume 8: Metallography, Structures and Phase Diagrams,” American Society for Metals, Novelty, OH.
Huskins, E. L. , Cao, B. , and Ramesh, K. T. , 2010, “ Strengthening Mechanisms in an Al–Mg Alloy,” Mater. Sci. Eng.: A, 527(6), pp. 1292–1298. [CrossRef]
Kim, Y.-W. , 1989, “ Intermetallic Alloys Based on Gamma Titanium Aluminide,” JOM, 41(7), pp. 24–30. [CrossRef]
Wang, E. , Gao, T. , Nie, J. , and Liu, X. , 2014, “ Grain Refinement Limit and Mechanical Properties of 6063 Alloy Inoculated by Al–Ti–C (B) Master Alloys,” J. Alloys Compd., 594, pp. 7–11. [CrossRef]
Misak, H. E. , Widener, C. A. , Burford, D. , and Asmatulu, R. , 2014, “ Fabrication and Characterization of Carbon Nanotube Nanocomposites Into 2024-T3 Al Substrates Via Friction Stir Welding Process,” ASME J. Eng. Mater. Technol., 136(2), p. 024501. [CrossRef]
Prasad, D. S. , Shoba, C. , and Ramanaiah, N. , 2014, “ Investigations on Mechanical Properties of Aluminum Hybrid Composites,” J. Mater. Res. Technol., 3(1), pp. 79–85. [CrossRef]


Grahic Jump Location
Fig. 1

XRD patterns of (a) Al–2Mg–1Ti, (b) Al–2Mg–3Ti, (c) Al–4Mg–2Ti, and (d) Al–6Mg–2Ti alloys for structural characterization

Grahic Jump Location
Fig. 2

Al–Mg–Ti phase diagram representing composition of elements and phases

Grahic Jump Location
Fig. 3

SEM (a) and (c) and optical microscopy (b) and (d) images of Al–2Mg–1Ti and Al–2Mg–3Ti alloys and their EDS spectrums (f) and (g) of points 1 and 2 spots

Grahic Jump Location
Fig. 4

SEM images (a) and (c) and elemental mapping images (b) and (d) of Al–4Mg–2Ti and Al–6Mg–2Ti alloys

Grahic Jump Location
Fig. 5

Variation of average grain size of Al–Mg alloys with different Ti concentrations

Grahic Jump Location
Fig. 6

Variation of Brinell hardness values of Al–Mg alloys with different Ti concentrations



Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In