Research Papers

Application of a Composite Model in the Analysis of Creep Deformation at Low and Intermediate Temperatures

[+] Author and Article Information
Xinjun Yang

Jiangsu Key Laboratory of Advanced Food
Manufacturing Equipment and Technology,
School of Mechanical Engineering,
Jiangnan University,
Wuxi 214122, Jiangsu, China
e-mail address: xinjun_yang@163.com

Xiang Ling

Jiangsu Key Laboratory of Process Enhancement
and New Energy Equipment Technology,
School of Mechanical and Power Engineering,
Nanjing Tech University,
Nanjing 211816, Jiangsu, China

1Corresponding author.

Contributed by the Materials Division of ASME for publication in the JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY. Manuscript received April 5, 2017; final manuscript received June 22, 2017; published online August 3, 2017. Assoc. Editor: Vikas Tomar.

J. Eng. Mater. Technol 139(4), 041013 (Aug 03, 2017) (6 pages) Paper No: MATS-17-1098; doi: 10.1115/1.4037312 History: Received April 05, 2017; Revised June 22, 2017

The creep behaviors of TA2 and R60702 at low and intermediate temperature were presented and discussed in this paper. Experimental results indicated that an apparent threshold stress was exhibited in the creep deformation of R60702. Meanwhile, the primary creep phase was found as the main pattern in the room temperature creep behavior of TA2. Compared with the exponential law, the power law has been proved to be a proper constitutive model in the description of primary creep phase. It also showed that θ projection method had its significant advantage in the evaluation of accelerated creep stage. Thus, a composite model which combined power law with θ projection method was applied in the creep curves evaluation at low and intermediate temperature. Based on the multiaxial creep deformation results, the model was modified and discussed. A linear relationship existed between composite model parameters and applied load. Finally, the creep life of TA2 and R60702 could be accurately predicted by the composite model, and it is suitable for the application in low and intermediate temperature creep life analysis.

Copyright © 2017 by ASME
Your Session has timed out. Please sign back in to continue.


Warren, A. D. , Griffiths, I. J. , Harniman, R. L. , Flewitt, P. E. J. , and Scott, T. B. , 2015, “ The Role of Ferrite in Type 316H Austenitic Stainless Steels on the Susceptibility to Creep Cavitation,” Mater. Sci. Eng., 635(21), pp. 59–69. [CrossRef]
Dyson, C. C. , Sun, W. , Hyde, C. J. , Brett, S. J. , and Hyde, T. H. , 2016, “ Use of Small Specimen Creep Data in Component Life Management: A Review,” Mater. Sci. Technol., 32(15), pp. 1567–1581. [CrossRef]
Borjali, S. , Allahkaram, S. R. , and Khosravi, H. , 2012, “ Effects of Working Temperature and Carbon Diffusion on the Microstructure of High Pressure Heat-Resistant Stainless Steel Tubes Used in Pyrolysis Furnaces During Service Condition,” Mater. Des., 34, pp. 65–73. [CrossRef]
Kwon, O. , Thomas, C. W. , and Knowles, D. , 2004, “ Multiaxial Stress Rupture Behaviour and Stress-State Sensitivity of Creep Damage Distribution in Durehete 1055 and 2.25Cr1Mo Steel,” Int. J. Pressure Vessels Piping, 81(6), pp. 535–542. [CrossRef]
Anderson, P. , Bellgardt, T. , and Jones, F. L. , 2003, “ Creep Deformation in a Modified 9Cr-1 Mo Steel,” Mater. Sci. Technol., 19(2), pp. 207–213. [CrossRef]
Jiang, X. J. , Zhou, Y. K. , Feng, Z. H. , Xia, C. Q. , Tan, C. L. , Liang, S. X. , Zhang, X. Y. , Ma, M. Z. , and Liu, R. P. , 2015, “ Influence of Zr Content on β-Phase Stability in α-Type Ti–Al Alloys,” Mater. Sci. Eng., 639(15), pp. 407–411. [CrossRef]
Kassner, M. E. , and Geantil, P. , 2011, “ Ambient Temperature Creep of Type 304 Stainless Steel,” ASME J. Eng. Mater. Technol., 133(2), p. 021012.
Peng, J. , Zhou, C. Y. , Dai, Q. , and He, X. H. , 2014, “ The Temperature and Stress Dependent Primary Creep of Cp-Ti at Low and Intermediate Temperature,” Mater. Sci. Eng., 611, pp. 123–135. [CrossRef]
Matsunaga, T. , Takahashi, K. , Kameyama, T. , and Sato, E. , 2009, “ Relaxation Mechanisms at Grain Boundaries for Ambient-Temperature Creep of H.C.P. Metals,” Mater. Sci. Eng., 510–511, pp. 356–358. [CrossRef]
Tanaka, H. , Yamada, T. , Sato, E. , and Jimbo, I. , 2006, “ Distinguishing the Ambient-Temperature Creep Region in a Deformation Mechanism Map of Annealed Cp-Ti,” Scr. Mater., 54(1), pp. 121–124. [CrossRef]
Kameyama, T. , Matsunaga, T. , Sato, E. , and Kuribayashi, K. , 2009, “ Suppression of Ambient-Temperature Creep in CP-Ti by Cold-Rolling,” Mater. Sci. Eng., 510–511, pp. 364–367. [CrossRef]
Laha, K. , Rao, K. B. S. , and Mannan, S. L. , 1990, “ Creep Behavior of Post-Weld Heat Treated 2.25Cr1Mo Ferritic Steel Base, Weld Metal and Weldments,” Mater. Sci. Eng., 129(2), pp. 183–195. [CrossRef]
Graham, A. , and Walles, K. F. A. , 1955, “ Relationships Between Long and Short-Time Creep and Tensile Properties of a Commercial Alloy,” J. Iron Steel Inst. Jpn., 179(12), pp. 105–120.
Evans, R. W. , Parker, J. D. , and Wilshire, B. , 1982, “ An Extrapolation Procedure for Long-Term Creep Strain and Creep Life Prediction With Special Reference to 0.5Cr0.5Mo0.25V Ferritic Steels,” Recent Advances in Creep and Fracture of Engineering Materials and Structures, Pineridge Press, Swansea, UK, pp. 135–184.
Evans, R. W. , 2000, “ A Constitutive Model for the High-Temperature Creep of Particle-Hardened Alloys Based on the θ Projection Method,” Proc. R. Soc. London Ser. A, 456(1996), pp. 835–868. [CrossRef]
Zhao, Y. P. , Gong, J. M. , Yong, J. , Wang, X. W. , Shen, L. M. , and Li, Q. N. , 2016, “ Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method,” Mater. Sci. Eng., 649(1), pp. 1–8. [CrossRef]
Jiang, F. , Li, P. , Cheng, C. Q. , Liu, C. H. , and Zhao, J. , 2015, “ Comparative Analysis of Creep Behavior Prediction of Heat Resistant Steel Based on Theta Projection and Composite Model,” J. Mater. Eng., 43(7), pp. 87–92.
Li, X. , Chen, G. , Wang, L. , Mei, Y. H. , Chen, X. , and Lu, G. Q. , 2013, “ Creep Properties of Low-Temperature Sintered Nano-Silver Lap Shear Joints,” Mater. Sci. Eng., 579(1), pp. 108–113. [CrossRef]
Law, M. , Payten, W. , and Snowden, K. , 1998, “ Finite Element Analysis of Creep Using Theta Project Data,” Int. J. Pressure Vessels Piping, 75(5), pp. 437–442. [CrossRef]
Kim, W. G. , Kim, S. H. , and Lee, C. B. , 2011, “ Long-Term Creep Characterization of Gr. 91 Steel by Modified Creep Constitutive Equations,” Met. Mater. Int., 17(3), pp. 497–504. [CrossRef]
Yang, Z. , and Wang, Z. , 2002, “ Research on Small Punch Creep Test-Analysis of Creep Stress,” Pressure Vessel Technol., 19(9), pp. 5–8.
Hyde, T. H. , Stoyanov, M. , Sun, W. , and Hyde, C. J. , 2010, “ On the Interpretation of Results From Small Punch Creep Tests,” J. Strain Anal. Eng. Des., 45(3), pp. 141–164. [CrossRef]
Yang, Z. , and Wang, Z. , 2003, “ Relationship Between Strain and Central Deflection in Small Punch Creep Specimens,” Int. J. Pressure Vessels Piping, 80(6), pp. 397–404. [CrossRef]


Grahic Jump Location
Fig. 1

The creep strain–time curves of TA2 at room temperature

Grahic Jump Location
Fig. 2

The creep strain–time curves of R60702 at 473 K

Grahic Jump Location
Fig. 3

Analysis of primary creep phase (a) TA2 at 300 MPa; analysis of primary creep phase (b) TA2 at 270 MPa; analysis of primary creep phase (c) R60702 at 145 MPa

Grahic Jump Location
Fig. 4

Fitting results of composite creep model for R60702 at 473 K

Grahic Jump Location
Fig. 5

Fitting results of composite creep model for nanosilver lap shear joints at 600 K

Grahic Jump Location
Fig. 6

The relationship between material parameters of composite model and stress

Grahic Jump Location
Fig. 7

The creep deflection–time curves of R60702 at different temperatures and loads

Grahic Jump Location
Fig. 8

Deformation model of round specimen in the multiaxial deformation status

Grahic Jump Location
Fig. 9

Fitting results of composite creep model for multiaxial creep results of R60702




Some tools below are only available to our subscribers or users with an online account.

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In