Unidirectional fiber-reinforced composites are often observed to fail in a longitudinal splitting mode in the fiber direction under far-field compressive loading with weak lateral confinement. An energy-based model is developed based on the principle of minimum potential energy and the evaluation of effective properties to obtain an analytical approximation to the critical stress for longitudinal splitting. The analytic estimate for the compressive strength is used to illustrate its dependence on material properties, surface energy, fiber volume fraction, fiber diameter, and lateral confining pressure. The predictions of the model show good agreement with available experimental data. [S0021-8936(00)02003-1]
Issue Section:
Technical Papers
1.
Shuart
, M. J.
, 1989
, “Failure of Compression-Loaded Multidirectional Composite Laminates
,” AIAA J.
, 27
, pp. 1274
–1279
.2.
Waas
, A. M.
, and Schultheisz
, C. R.
, 1996
, “Compressive Failure of Composites, Part II: Experimental Studies
,” Prog. Aerosp. Sci.
, 32
, pp. 43
–78
.3.
Fleck
, N. A.
, 1997
, “Compressive Failure of Fiber Reinforced Composites
,” Adv. Appl. Mech.
, 33
, pp. 43
–117
.4.
Tsai
, S. W.
, and Wu
, E. M.
, 1971
, “A General Theory of Strength for Anisotropic Materials
,” J. Compos. Mater.
, 5
, pp. 58
–80
.5.
Christensen
, R. M.
, 1997
, “Stress Based Yield/Failure Criteria for Fiber Composites
,” Int. J. Solids Struct.
, 34
, pp. 529
–543
.6.
Budiansky
, B.
, and Fleck
, N. A.
, 1993
, “Compressive Failure of Composites
,” J. Mech. Phys. Solids
, 41
, pp. 183
–211
.7.
Kyriakides
, S.
, Arseculeratne
, R.
, Perry
, E. J.
, and Liechti
, K. M.
, 1995
, “On the Compressive Failure of Fiber Reinforced Composites
,” Int. J. Solids Struct.
, 32
, pp. 689
–738
.8.
Schultheisz
, C. R.
, and Waas
, A. M.
, 1996
, “Compressive Failure of Composites, Part I: Testing and Micromechanical Theories
,” Prog. Aerosp. Sci.
, 32
, pp. 1
–42
.9.
Lee
, S. H.
, and Waas
, A. M.
, 1999
, “Compressive Response and Failure of Fiber Reinforced Unidirectional Composites
,” Int. J. Fract.
, 100
, pp. 275
–306
.10.
Weaver
, C. W.
, and Williams
, J. G.
, 1975
, “Deformation of a Carbon-Epoxy Composite Under Hydrostatic Pressure
,” J. Mater. Sci.
, 10
, pp. 1323
–1333
.11.
Parry
, T. V.
, and Wronski
, A. S.
, 1982
, “Kinking and Compressive Failure in Uniaxially Aligned Carbon Fibre Composite Tested Under Superposed Hydrostatic Pressure
,” J. Mater. Sci.
, 17
, pp. 893
–900
.12.
Sigley
, R. H.
, Wronski
, A. S.
, and Parry
, T. V.
, 1992
, “Axial Compressive Failure of Glass-Fibre Polyester Composites Under Superposed Hydrostatic Pressure: Influence of Fibre Bundle Size
,” Compos. Sci. Technol.
, 43
, pp. 171
–183
.13.
Bhattacharya
, K.
, Ortiz
, M.
, and Ravichandran
, G.
, 1998
, “Energy-Based Model of Compressive Splitting in Heterogeneous Brittle Solids
,” J. Mech. Phys. Solids
, 46
, pp. 2171
–2181
.14.
Hashin
, Z.
, 1996
, “Finite Thermoelastic Fracture Criterion With Application to Laminate Cracking Analysis
,” J. Mech. Phys. Solids
, 44
, pp. 1129
–1145
.15.
Waas, A. M., Takeda, N., Yuan, J., and Lee, S. H., 1997, “Static and Dynamic Compressive Behavior of Glass Fiber Reinforced Unidirectional Composites,” Proceedings of the American Society for Composites, Twelfth Technical Conference, Dearborn, MI, Technomic, Lancaster, PA, pp. 552–561.
16.
Hashin
, Z.
, and Rosen
, B. W.
, 1964
, “The Elastic Moduli of Fiber-Reinforced Materials
,” ASME J. Appl. Mech.
, 31
, pp. 223
–232
.17.
Hill
, R.
, 1964
, “Theory of Mechanical Properties of Fibre-Strengthened Materials: I. Elastic Behavior
,” J. Mech. Phys. Solids
, 12
, pp. 199
–212
.18.
Nemat-Nasser, S., and Hori, M., 1993, Micromechanics: Overall Properties of Heterogeneous Materials, Elsevier, New York.
19.
Liu
, C.
, Huang
, Y.
, Lovato
, M. L.
, and Stout
, M. G.
, 1997
, “Measurement of the Fracture Toughness of a Fiber-Reinforced Composite Using the Brazilian Disk Geometry
,” Int. J. Fract.
, 87
, pp. 241
–263
.20.
Lambros
, J.
, and Rosakis
, A. J.
, 1997
, “Dynamic Crack Initiation and Growth in Thick Unidirectional Graphite/Epoxy Plates
,” Compos. Sci. Technol.
, 57
, pp. 55
–65
.21.
Daniel, I. M., and Isahi, O., 1994, Engineering Mechanics of Composite Materials, Oxford University Press, Oxford, UK.
Copyright © 2000
by ASME
You do not currently have access to this content.
