Scaffold-based tissue-engineered constructs as well as cell-free implants offer promising solutions to focal cartilage lesions. However, adequate mechanical stability of these implants in the lesion is required for successful repair. Fibrin is the most common clinically available adhesive for cartilage implant fixation, but fixation quality using fibrin is not well understood. The objectives of this study were to investigate the conditions leading to damage in the fibrin adhesive and to determine which adhesive properties are important in preventing delamination at the interface. An idealized finite element model of the medial compartment of the knee was created, including a circular defect and an osteochondral implant. Damage and failure of fibrin at the interface was represented by a cohesive zone model with coefficients determined from an inverse finite element method and previously published experimental data. Our results demonstrated that fibrin glue alone may not be strong enough to withstand physiologic loads in vivo while fibrin glue combined with chondrocytes more effectively prevents damage at the interface. The results of this study suggest that fibrin fails mainly in shear during off-axis loading and that adhesive materials that are stronger or more compliant than fibrin may be good alternatives due to decreased failure at the interface. The present model may be used to improve design and testing protocols of bioadhesives and give insight into the failure mechanisms of cartilage implant fixation in the knee joint.
Computational Investigation of Fibrin Mechanical and Damage Properties at the Interface Between Native Cartilage and Implant
- Views Icon Views
- Share Icon Share
- Search Site
Vahdati, A., Zhao, Y., Ovaert, T. C., and Wagner, D. R. (October 26, 2012). "Computational Investigation of Fibrin Mechanical and Damage Properties at the Interface Between Native Cartilage and Implant." ASME. J Biomech Eng. November 2012; 134(11): 111004. https://doi.org/10.1115/1.4007748
Download citation file: