Skip Nav Destination
Issues
May 2006
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Analysis of Chemically Reacting Transport Phenomena in an Anode Duct of Intermediate Temperature SOFCs
J. Fuel Cell Sci. Technol. May 2006, 3(2): 89–98.
doi: https://doi.org/10.1115/1.2173662
Analysis, Modeling, and Validation for the Thermal Dynamics of a Polymer Electrolyte Membrane Fuel Cell System
J. Fuel Cell Sci. Technol. May 2006, 3(2): 99–110.
doi: https://doi.org/10.1115/1.2173663
Heat Exchangers for Fuel Cell and Hybrid System Applications
J. Fuel Cell Sci. Technol. May 2006, 3(2): 111–118.
doi: https://doi.org/10.1115/1.2173665
Stresses in Proton Exchange Membranes Due to Hygro-Thermal Loading
J. Fuel Cell Sci. Technol. May 2006, 3(2): 119–124.
doi: https://doi.org/10.1115/1.2173666
The Electrochemical Performance of Anode-Supported SOFCs with LSM-Type Cathodes Produced by Alternative Processing Routes
J. Fuel Cell Sci. Technol. May 2006, 3(2): 125–130.
doi: https://doi.org/10.1115/1.2173667
Topics:
Anodes
,
Solid oxide fuel cells
,
Tape casting
,
Temperature
,
Grain size
,
Pressing
Development of High Performance Micro DMFCS and a DMFC Stack
J. Fuel Cell Sci. Technol. May 2006, 3(2): 131–136.
doi: https://doi.org/10.1115/1.2173668
A Thermodynamic Analysis of Electricity and Hydrogen Co-Production Using a Solid Oxide Fuel Cell
J. Fuel Cell Sci. Technol. May 2006, 3(2): 137–143.
doi: https://doi.org/10.1115/1.2173669
Topics:
Cycles
,
Exergy
,
Fuel cells
,
Fuels
,
Hydrogen
,
Hydrogen production
,
Solid oxide fuel cells
,
Steam
,
Steam reforming
,
Combustion chambers
Dynamic Simulation of an Integrated Solid Oxide Fuel Cell System Including Current-Based Fuel Flow Control
J. Fuel Cell Sci. Technol. May 2006, 3(2): 144–154.
doi: https://doi.org/10.1115/1.2174063
Topics:
Flow (Dynamics)
,
Flow control
,
Fuel cells
,
Fuels
,
Hydrogen
,
Simulation
,
Solid oxide fuel cells
,
Temperature
,
Transients (Dynamics)
,
Heat transfer
The Thermodynamic Evaluation and Optimization of Fuel Cell Systems
J. Fuel Cell Sci. Technol. May 2006, 3(2): 155–164.
doi: https://doi.org/10.1115/1.2174064
Entropy Based Design of Fuel Cells
J. Fuel Cell Sci. Technol. May 2006, 3(2): 165–174.
doi: https://doi.org/10.1115/1.2174065
Topics:
Electrodes
,
Entropy
,
Fuel cells
,
Proton exchange membrane fuel cells
,
Fuels
,
Solid oxide fuel cells
,
Design
Hydrogen Production From Methane by Using Oxygen Permeable Ceramics
J. Fuel Cell Sci. Technol. May 2006, 3(2): 175–179.
doi: https://doi.org/10.1115/1.2174066
Topics:
Ceramics
,
Density
,
Methane
,
Oxygen
,
Membranes
,
Electrical conductivity
,
Hydrogen production
Lattice Boltzmann Simulations of Bubble Dynamics at the Anode of a
J. Fuel Cell Sci. Technol. May 2006, 3(2): 180–187.
doi: https://doi.org/10.1115/1.2174067
To Achieve the Best Performance Through Optimization of Gas Delivery and Current Collection in Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. May 2006, 3(2): 188–194.
doi: https://doi.org/10.1115/1.2174068
Fuel Cell Hybrids, Their Thermodynamics and Sustainable Development
J. Fuel Cell Sci. Technol. May 2006, 3(2): 195–201.
doi: https://doi.org/10.1115/1.2174069
Topics:
Entropy
,
Fuel cells
,
Fuels
,
Heat
,
Sustainable development
,
Flow (Dynamics)
,
Temperature
,
Heat engines
,
Transportation systems
,
Solid oxide fuel cells
Dynamic Characteristics of a Direct Methanol Fuel Cell
J. Fuel Cell Sci. Technol. May 2006, 3(2): 202–207.
doi: https://doi.org/10.1115/1.2174070
Topics:
Cycles
,
Direct methanol fuel cells
,
Dynamic response
,
Oxygen
,
Temperature
,
Stress
,
Flow (Dynamics)
Effect of Various Electrolyte Compositions on the Degradation in Molten Carbonates
J. Fuel Cell Sci. Technol. May 2006, 3(2): 208–212.
doi: https://doi.org/10.1115/1.2174071
Topics:
Electrolytes
,
Temperature
,
Carbon dioxide
Hydrogen Production Performance of a 10-Cell Planar Solid-Oxide Electrolysis Stack
J. Fuel Cell Sci. Technol. May 2006, 3(2): 213–219.
doi: https://doi.org/10.1115/1.2179435
Topics:
Electrolysis
,
Hydrogen
,
Hydrogen production
,
Solid oxide fuel cells
,
Steam
,
Temperature
,
Flow (Dynamics)
,
Current density
,
Electrodes
,
Stainless steel
Technical Brief
Semiempirical Model for Determining PEM Electrolyzer Stack Characteristics
J. Fuel Cell Sci. Technol. May 2006, 3(2): 220–223.
doi: https://doi.org/10.1115/1.2174072
Topics:
Anodes
,
Current density
,
Electrical conductivity
,
Membranes
,
Proton exchange membranes
,
Temperature
,
Pressure
,
Electrodes
,
Curve fitting
Email alerts
RSS Feeds
State of Health Estimation Method for Lithium-Ion Batteries Based on Multifeature Fusion and BO-BiGRU Model
J. Electrochem. En. Conv. Stor (November 2025)
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)
In-situ synthesis nano PtRuW/WC HER catalyst for acid hydrogen evolution by microwave method
J. Electrochem. En. Conv. Stor
Joint Model Parameter Identification and Extended Kalman Filter Algorithm for the State of Charge Estimation of Lithium Iron Phosphate Battery
J. Electrochem. En. Conv. Stor (August 2025)
Ultrasound-Enabled Adaptive Protocol for Fast Charging of Lithium-Ion Batteries
J. Electrochem. En. Conv. Stor (August 2025)