Skip Nav Destination
Issues
February 2011
This article was originally published in
Journal of Fuel Cell Science and Technology
ISSN 1550-624X
EISSN 1551-6989
In this Issue
Research Papers
Methanol-Tolerant Oxygen Reduction Reaction at Pt–Pd/C Alloy Nanocatalysts
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011001.
doi: https://doi.org/10.1115/1.4001759
Design, Optimization, and Fabrication of Slotted-Interdigitated Thin Metallic Bipolar Plates for PEM Fuel Cells
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011002.
doi: https://doi.org/10.1115/1.4002229
Graduated Resistance to Gas Flow Through a GDL in an Unconventional PEM Stack
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011003.
doi: https://doi.org/10.1115/1.4002310
A Controllable Membrane-Type Humidifier for Fuel Cell Applications—Part II: Controller Design, Analysis and Implementation
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011004.
doi: https://doi.org/10.1115/1.4001020
Topics:
Control equipment
,
Humidifiers
,
Temperature
,
Water
,
Errors
,
Flow (Dynamics)
Bifunctionally Graded Electrode Supported SOFC Modeling and Computational Thermal Fluid Analysis for Experimental Design
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011005.
doi: https://doi.org/10.1115/1.4002141
Topics:
Electrodes
,
Solid oxide fuel cells
,
Modeling
,
Pressure
,
Porosity
,
Experimental design
,
Electrolytes
,
Anodes
,
Computational fluid dynamics
,
Gaseous fuels
Anode Fuel and Steam Recycling for Internal Methane Reforming SOFCs: Analysis of Carbon Deposition
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011006.
doi: https://doi.org/10.1115/1.4002230
Sintering Mechanisms of Cobalt-Doped Ceria and Zirconia Electrolytes in Intermediate-Temperature Solid Oxide Fuel Cells
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011007.
doi: https://doi.org/10.1115/1.4002231
Topics:
Electrolytes
,
Firing
,
Sintering
,
Solid oxide fuel cells
,
Temperature
,
Cobalt
Performance of Microtubular SOFCs Using Ethanol Fuel
Toshio Suzuki, Toshiaki Yamaguchi, Yoshinobu Fujishiro, Masanobu Awano, Tetsuro Kikuchi, Akira Fujii, Yoshihiro Funahashi
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011008.
doi: https://doi.org/10.1115/1.4002232
Topics:
Ethanol
,
Fuels
,
Solid oxide fuel cells
,
Water
,
Thermal shock
Performance of a Direct Methanol Fuel Cell Operating Close to Room Temperature
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011009.
doi: https://doi.org/10.1115/1.4002311
Topics:
Air flow
,
Anodes
,
Carbon
,
Diffusion (Physics)
,
Direct methanol fuel cells
,
Flow (Dynamics)
,
Gas diffusion layers
,
Methanol
,
Textiles
,
Temperature
Numerical Studies of Thermal Transport and Mechanical Effects Due to Thermal-Inertia Loading in PEMFC Stack in Subfreezing Environment
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011010.
doi: https://doi.org/10.1115/1.4001021
A Numerical Model for Predicting Gas Diffusion Layer Failure in Proton Exchange Membrane Fuel Cells
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011011.
doi: https://doi.org/10.1115/1.4002312
Topics:
Failure
,
Gas diffusion layers
,
Proton exchange membrane fuel cells
,
Carbon
,
Elasticity
,
Fibers
Multicomponent Proton Conducting Ceramics of for an Intermediate Temperature Fuel Cell
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011012.
doi: https://doi.org/10.1115/1.4002313
Topics:
Ceramics
,
Fuel cells
,
Protons
,
Sintering
,
Temperature
Interfacial Water Transport Effects in Proton-Exchange Membranes
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011013.
doi: https://doi.org/10.1115/1.4002398
Topics:
Membranes
,
Water
,
Interfacial thermal resistance
,
Protons
Novel Approaches for the Integration of High Temperature PEM Fuel Cells Into Aircrafts
J. Fuel Cell Sci. Technol. February 2011, 8(1): 011014.
doi: https://doi.org/10.1115/1.4002400
Topics:
Aircraft
,
Fuel cells
,
High temperature
,
Hydrogen
,
Proton exchange membrane fuel cells
,
Temperature
Technical Briefs
Hydrophilic ePTFE-Based Composite Membranes for PEMFCs
J. Fuel Cell Sci. Technol. February 2011, 8(1): 014501.
doi: https://doi.org/10.1115/1.4002309
A New Complex Design for Air-Breathing Polymer Electrolyte Membrane Fuel Cells Aided by Rapid Prototyping
Chen-Yu Chen, Yun-Che Wen, Wei-Hsiang Lai, Ming-Chang Chou, Biing-Jyh Weng, Ching-Yuan Hsieh, Chien-Chih Kung
J. Fuel Cell Sci. Technol. February 2011, 8(1): 014502.
doi: https://doi.org/10.1115/1.4002227
The Ejector Performance of a 75 kW Molten Carbonate Fuel Cell System
J. Fuel Cell Sci. Technol. February 2011, 8(1): 014503.
doi: https://doi.org/10.1115/1.4002131
Topics:
Ejectors
,
Molten carbonate fuel cells
,
Nozzles
,
Flow (Dynamics)
,
Pressure
Email alerts
RSS Feeds
A Fault Diagnosis Method for Electric Vehicle Lithium Power Batteries Based on Dual-Feature Extraction From the Time and Frequency Domains
J. Electrochem. En. Conv. Stor (August 2025)
Optimization of thermal non-uniformity challenges in liquid-cooled lithium-ion battery packs using NSGA-II
J. Electrochem. En. Conv. Stor
Ultrasound-enabled adaptive protocol for fast charging of lithium-ion batteries
J. Electrochem. En. Conv. Stor
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs
J. Electrochem. En. Conv. Stor (August 2025)
Joint Model Parameter Identification and EKF Algorithm for the SOC Estimation of LFP Battery
J. Electrochem. En. Conv. Stor