... that leg tapering has minimal effects on the temperature distribution in and energy efficiency of the nonprismatic leg under the prescribed cold and hot side temperatures' boundary conditions provided that the volume of the leg remains the same. The energy efficiency of the tapered leg, however, can...

... equation, finite Fourier transform and separation of variables method are used. The present solution is used to find the temperature distribution in a composite cylindrical vessel for which the composite material is graphite/epoxy and the vessel is prone to an external heat flux and also ambient flow...

... temperature gradient and high-temperature distribution throughout the reactor were strongly dependent on the operating conditions. The inlet gas temperature has remarkable effects on the temperature distribution. The thermal performance of porous-medium filled solar thermochemical reactor could be improved...

... temperature on the shell side, when a step change is imposed on the liquid entering the tubes. Marnoch heat engine heat recovery power generation heat transfer heat exchanger temperature distribution Waste heat recovery has a number of significant benefits in industrial processes...

... gratings, a CCD camera is applied to capture the image, the distorted fringes. Based on the moiré deflectometry theory, the two-dimensional temperature distribution in free boundary environment can be determined in terms of the captured fringe shift analysis. This work has successfully measured the two...

... with the human head and may lead to detrimental effects on human health. However, the resulting thermophysiologic response of the human head is not well understood. In order to gain insight into the phenomena occurring within the human head with temperature distribution induced by electromagnetic field...

..., the resulting thermo-physiologic response of the human eye to electromagnetic fields is not well understood. In order to gain insight into the phenomena occurring within the human eye with temperature distribution induced by electromagnetic fields, a detailed knowledge of absorbed power distribution as well...

...R. Karvinen The heat transfer coefficient of convection from the wall to the flow depends on flow type, on surface temperature distribution in a stream-wise direction, and in transient cases also on time. In so-called conjugated problems, the surface temperature distribution of the wall and flow...

... temperature, temperature distribution, and cooling power using only inlet gas properties as input variables. To achieve this, the model incorporated gas equations of state to account for changing gas properties due to heat transfer within the heat exchanger and expansion within the capillary. In consideration...

...Hossein Rastgoftar; Mohammad Eghtesad; Alireza Khayatian This paper presents a solution to the control (stabilization) problem of temperature distribution in spherical shells with spatially varying properties. The desired temperature distribution satisfies the steady-state heat conduction equation...

...A. Barletta; M. Celli; A. V. Kuznetsov The linear stability of a parallel flow in a heterogeneous porous channel is analyzed by means of the Darcy law and the Oberbeck–Boussinesq approximation. The basic velocity and temperature distributions are influenced by the effect of the viscous dissipation...

..., eight species are involved in 26 elementary reactions. On the platinum hot surface, additional surface species are included that are involved in 16 additional surface chemical reactions. The platinum surface temperature distribution is prespecified, while the properties of the reacting flow are computed...

... in the porous region was modeled using the Brinkman–Forchheimer extended Darcy model. To solve governing equations of both the porous and viscous regions including thermal energy and momentum equations, a two-parameter perturbation method was applied. The velocity and temperature distributions of both...

... thickness, albedo coefficient, and the radiation-conduction parameter on the flow and temperature distributions are carried out. backward facing step laminar forced convection flow radiation heat transfer blocked-off method bleeding Forced convection flow in channels with forward or backward...

... of the phase change front. The energy balance through the phase change front furnishes the equation for time dependence of the front position, which is numerically solved. Substitution of the front position for a particular instant in the heat conduction equation solutions gives the temperature distribution...

... transfer shapes (structures) temperature distribution moving heat source half-space temperature distribution arbitrary geometry modeling The problem of stationary and moving heat sources applies to many fields of engineering such as metal cutting, spot welding, laser cutting, laser...

... thermophysiologic response of the human body is not well understood. In order to gain insight into the phenomena occurring within the human body with temperature distribution induced by electromagnetic field, a detailed knowledge of absorbed power distribution is necessary. In this study, the effects of operating...

...R. Chakraborty; A. Sirkar A new design of fin has been conceived, which is in the shape of a semicircular strip. A step-by-step straightforward detailed derivation of the governing equations for two-dimensional temperature distribution in a semicircular fin has been presented, assuming a third...

... microwave heating phenomena. The simulation results agree well with the experimental data. Based on the results obtained, the inserted resonator has a strong effect on the uniformity of temperature distributions, depending on the penetration depth of microwave. The optimum distances of the resonator depend...

...Hossein Rastgoftar; Mohammad Eghtesad; Alireza Khayatian In this paper, an analytical method and a partial differential equation based solution to control temperature distribution for functionally graded (FG) plates is introduced. For the rectangular FG plate under consideration, it is assumed...